- We are currently not taking any orders.
Tiny-M
Showing all 8 resultsSorted by popularity
-
ANNEX-ENGINEERING, BIGTREETECH, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Tiny-M
BIGTREETECH TFT70 | TFT50 | TFT43 v3.0
ANNEX-ENGINEERING, BIGTREETECH, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Tiny-MBIGTREETECH TFT70 | TFT50 | TFT43 v3.0
BIGTREETECH has gone further to create huge size TFT screens for all TOUCH Screen lovers!
Three sizes are added into the TFT family:
- TFT70 v3.0 (7-inch)
- TFT50 v3.0 (5-inch)
- TFT43 v3.0 (4.3-inch)
All of them comes with RGB color screen and dual mode.
Users can switch between TOUCH and knob control in second.
TOUCH screen firmware are at BIGTREETECH’s Github.
It is highly configurable. Users can customize the firmware and image on the screen.
Enjoy the love of a 7-inch color screen!
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-tft70-tft50-tft43-v3-0 -
ANNEX-ENGINEERING, BIGTREETECH, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Tiny-M, Voron 0, VORON Design
BIGTREETECH SKR Mini E3 v2.0
ANNEX-ENGINEERING, BIGTREETECH, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Tiny-M, Voron 0, VORON DesignBIGTREETECH SKR Mini E3 v2.0
SKR Mini E3 V2.0 is a perfect substitutes for beginner’s grade 3D printer.
Most of the beginner’s grade printers come with a low end 8-bit controller board just to cut cost.
In most cases, user cannot flash open-source firmware like Marlin into the factory board.
It makes DIY difficult. They also come without a bed leveling sensor.
In order to add a leveling probe and flash a updated firmware with new functions, user needs a new board.
SKR Mini E3 V2.0 is a perfect choice. It comes with 4 on-board TMC2209 stepper motor chips.
It needs no tuning at all. It is a plug and play board!
- Item Type: Control Board
- Model Number: BIGTREETECH SKR Mini E3 v2.0
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M3 – ST STM32F103RCT6
- Maximum Clock Frequency: 72 MHz
- Dual Z-axis Interface
- Fan Support: 2 x CNC always on fan
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: ALL BIGTREETECH Screen, LCD2004, LCD12864, Ender 3 Original Screen
- Support Driver: 4 On-board TMC2209
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-skr-mini-e3-v2-0 -
DIY 3D Printers, LRS Series, Mean Well, Power Supply Unit, Tiny-M, Voron 0, VORON Design
Mean Well LRS-100-24
DIY 3D Printers, LRS Series, Mean Well, Power Supply Unit, Tiny-M, Voron 0, VORON DesignMean Well LRS-100-24
Mean Well is one of the most reliable power supply manufacturer in the industry.
It is the one and only choice when it comes to 3D printer’s power supply.
We import our Mean Well PSU from legitimate Mean Well’s distributor.
Do not cheap out such an important part as it may cause safety issue.
You need a reliable power supply. Trust only genuine parts!
SKU: mean-well-lrs-100-24 -
DIY 3D Printers, HIWIN, Linear Rail, Tiny-M
HIWIN Linear Rail – Tiny-M 3D Printer Build
In the box:
3 x Genuine MGN9H1R200Z0CM Linear Rail with Carriage – 200mm
2 x Genuine MGN12H1R200Z0CM Linear Rail with Carriage – 200mm
If you need any other length other than the standard, we can order it for your build.
Special order takes 5-7 days to process.
Normal shipping takes around 7 days.
Model Number: MGN9H1R200Z0CM & MGN12H1R200Z0CM
Accuracy Class: C
Verified and packed in: Hong Kong
Imported from: Shenzhen, China
Origin: Taiwan
SKU: hiwin-linear-rail-tiny-m-150mm -
ANNEX-ENGINEERING, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Raspberry Pi, Tiny-M, Voron 0, Voron 2.4, VORON Design
Raspberry Pi 4 Model B
-
ANNEX-ENGINEERING, BIGTREETECH, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Tiny-M, Voron 2.4, VORON Design
BIGTREETECH TMC2226 v1.0
ANNEX-ENGINEERING, BIGTREETECH, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Tiny-M, Voron 2.4, VORON DesignBIGTREETECH TMC2226 v1.0
TMC2226 is BIGTREETECH latest generation stepper motor driver.
It is an ultra-quiet stepper motor.
It has a better heat dissipation than TMC2209.
Marlin is currently not supporting TMC2226.
It can still be used by defining it as TMC2209.
According to Marlin developers, it works.
- 2 Phase stepper motor up to 2.0A RMS (2.8A Max)
- Motor Supply Voltage: 4.75V – 29V
- Logic Supply Voltage: 3.3 – 5V
- UART Mode
- StealthCrop2
- Spreadcycle
- Stallguard4
- CoolStep current control saves 75% energy
- 256 Microstep
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-tmc2226-v1-0 -
ANNEX-ENGINEERING, BLV, DIY 3D Printers, LRS Series, Mean Well, Power Supply Unit, Prusa Bear Upgrade, Prusa Original, Tiny-M, Voron 2.4, VORON Design
Mean Well LRS-200-24
ANNEX-ENGINEERING, BLV, DIY 3D Printers, LRS Series, Mean Well, Power Supply Unit, Prusa Bear Upgrade, Prusa Original, Tiny-M, Voron 2.4, VORON DesignMean Well LRS-200-24
Mean Well is one of the most reliable power supply manufacturer in the industry.
It is the one and only choice when it comes to 3D printer’s power supply.
We import our Mean Well PSU from legitimate Mean Well’s distributor.
Do not cheap out such an important part as it may cause safety issue.
You need a reliable power supply. Trust only genuine parts!
SKU: mean-well-lrs-200-24 -
ANNEX-ENGINEERING, BLV, DIY 3D Printers, Mean Well, Power Supply Unit, Prusa Bear Upgrade, Prusa Original, RS Series, Tiny-M, Voron 0, Voron 2.4, VORON Design
Mean Well RS-25-5
ANNEX-ENGINEERING, BLV, DIY 3D Printers, Mean Well, Power Supply Unit, Prusa Bear Upgrade, Prusa Original, RS Series, Tiny-M, Voron 0, Voron 2.4, VORON DesignMean Well RS-25-5
Mean Well is one of the most reliable power supply manufacturer in the industry.
It is the one and only choice when it comes to 3D printer’s power supply.
We import our Mean Well PSU from legitimate Mean Well’s distributor.
Do not cheap out such an important part as it may cause safety issue.
You need a reliable power supply. Trust only genuine parts!
SKU: mean-well-rs-25-5
