TFT70 v3.0 | TFT50 v3.0 | TFT45 v3.0
- We are currently not taking any orders.
ANNEX-ENGINEERING, BIGTREETECH, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Tiny-M
BIGTREETECH TFT70 | TFT50 | TFT43 v3.0
From: HKD 425.0
From: HKD 425.0
BIGTREETECH has gone further to create huge size TFT screens for all TOUCH Screen lovers!
Three sizes are added into the TFT family:
- TFT70 v3.0 (7-inch)
- TFT50 v3.0 (5-inch)
- TFT43 v3.0 (4.3-inch)
All of them comes with RGB color screen and dual mode.
Users can switch between TOUCH and knob control in second.
TOUCH screen firmware are at BIGTREETECH’s Github.
It is highly configurable. Users can customize the firmware and image on the screen.
Enjoy the love of a 7-inch color screen!
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
HKD 425.0 – HKD 513.0
| Weight | N/A |
|---|---|
| Size | TFT70 v3.0, TFT50 v3.0, TFT43 v3.0 |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4
BIGTREETECH TMC2209 v1.2
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4BIGTREETECH TMC2209 v1.2
TMC2209 is BIGTREETECH’s best selling stepper motor driver.
It is an ultra-quiet stepper motor driver.
It has a good heat dissipation.
It allows you to run the high current motor with no heat overheat issues.
- 2 Phase stepper motor up to 2.0A RMS (2.8A Max)
- Motor Supply Voltage: 4.75V – 29V
- Logic Supply Voltage: 3.3 – 5V
- UART Mode
- StealthCrop2
- Spreadcycle
- Stallguard4
- CoolStep current control saves 75% energy
- 256 Microstep
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-tmc2209-v1-2 -
DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M, VORON Design, Voron 0, Voron 2.4, Power Supply Unit, Mean Well, RS Series
Mean Well RS-25-5
DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M, VORON Design, Voron 0, Voron 2.4, Power Supply Unit, Mean Well, RS SeriesMean Well RS-25-5
Mean Well is one of the most reliable power supply manufacturer in the industry.
It is the one and only choice when it comes to 3D printer’s power supply.
We import our Mean Well PSU from legitimate Mean Well’s distributor.
Do not cheap out such an important part as it may cause safety issue.
You need a reliable power supply. Trust only genuine parts!
SKU: mean-well-rs-25-5 -
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV
BIGTREETECH TMC5161 v1.0
TMC5161 is BIGTREETECH high end stepper motor driver.
It has the highest allowed voltage and current spec among all BIGTREETECH TMC drivers.
- 2 Phase stepper motor up to 3.1A RMS
- Motor Supply Voltage: 8V – 35V
- Logic Supply Voltage: 3.3 – 5V
- Rsense: 62mΩ
- SPI Mode
- Built-in MOSEFT
- StealthCrop2
- Spreadcycle
- Stallguard2
- DCStep
- CoolStep
- 256 Microstep
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-tmc5161-v1-0 -
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M, VORON Design, Voron 0
BIGTREETECH SKR Mini E3 v2.0
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M, VORON Design, Voron 0BIGTREETECH SKR Mini E3 v2.0
SKR Mini E3 V2.0 is a perfect substitutes for beginner’s grade 3D printer.
Most of the beginner’s grade printers come with a low end 8-bit controller board just to cut cost.
In most cases, user cannot flash open-source firmware like Marlin into the factory board.
It makes DIY difficult. They also come without a bed leveling sensor.
In order to add a leveling probe and flash a updated firmware with new functions, user needs a new board.
SKR Mini E3 V2.0 is a perfect choice. It comes with 4 on-board TMC2209 stepper motor chips.
It needs no tuning at all. It is a plug and play board!
- Item Type: Control Board
- Model Number: BIGTREETECH SKR Mini E3 v2.0
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M3 – ST STM32F103RCT6
- Maximum Clock Frequency: 72 MHz
- Dual Z-axis Interface
- Fan Support: 2 x CNC always on fan
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: ALL BIGTREETECH Screen, LCD2004, LCD12864, Ender 3 Original Screen
- Support Driver: 4 On-board TMC2209
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-skr-mini-e3-v2-0
There are no reviews yet.