- We are currently not taking any orders.
ANNEX-ENGINEERING, BLV, DIY 3D Printers, Mean Well, Power Supply Unit, Prusa Bear Upgrade, Prusa Original, RS Series, Tiny-M, Voron 0, Voron 2.4, VORON Design
Mean Well RS-25-5
Mean Well is one of the most reliable power supply manufacturer in the industry.
It is the one and only choice when it comes to 3D printer’s power supply.
We import our Mean Well PSU from legitimate Mean Well’s distributor.
Do not cheap out such an important part as it may cause safety issue.
You need a reliable power supply. Trust only genuine parts!
HKD 82.0
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4
BIGTREETECH SKR v1.4
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4BIGTREETECH SKR v1.4
SKR v1.4 is BIGTREETECH’s latest control board for 3D printers and CNC machines.
Carrying its predecessor’s success, SKR v1.4 quickly becomes the most famous and best selling control board in 2020.
A lot of new features are added since v1.3.
It now supports WiFi communication and RGB lights.
Unlike the SKR v1.4 Turbo, SKR v1.4 uses LPC1768 chips running at a but slower clock speed.
However, it does not lower its performance by much.
It is still a very good budget choice over the SKR v1.4 Turbo.
- Item Type: Control Board
- Model Number: BIGTREETECH SKR V1.4
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M3 – NXP LPC1768FBD100
- Maximum Clock Frequency: 100 MHz
- Wifi Module: ESP-01S
- Dual Z-axis Interface
- Fan Support: 1 x CNC always on fan, 3 x Frequent fan
- Interfaces: I2C, SPI, Wifi, Closed loop drive, RGB light belt, DCDC mode power module
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: 2.8 “TFT, 3.5” TFT, LCD2004, LCD12864
- Support Driver: TMC2226, TMC2209, TMC2208, TMC2130, ST820, DRV8825, A4988, etc.
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-skr-v1-4 -
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M, VORON Design, Voron 0
BIGTREETECH SKR Mini E3 v2.0
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M, VORON Design, Voron 0BIGTREETECH SKR Mini E3 v2.0
SKR Mini E3 V2.0 is a perfect substitutes for beginner’s grade 3D printer.
Most of the beginner’s grade printers come with a low end 8-bit controller board just to cut cost.
In most cases, user cannot flash open-source firmware like Marlin into the factory board.
It makes DIY difficult. They also come without a bed leveling sensor.
In order to add a leveling probe and flash a updated firmware with new functions, user needs a new board.
SKR Mini E3 V2.0 is a perfect choice. It comes with 4 on-board TMC2209 stepper motor chips.
It needs no tuning at all. It is a plug and play board!
- Item Type: Control Board
- Model Number: BIGTREETECH SKR Mini E3 v2.0
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M3 – ST STM32F103RCT6
- Maximum Clock Frequency: 72 MHz
- Dual Z-axis Interface
- Fan Support: 2 x CNC always on fan
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: ALL BIGTREETECH Screen, LCD2004, LCD12864, Ender 3 Original Screen
- Support Driver: 4 On-board TMC2209
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-skr-mini-e3-v2-0 -
DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M, VORON Design, Voron 2.4, Power Supply Unit, Mean Well, LRS Series
Mean Well LRS-200-24
DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M, VORON Design, Voron 2.4, Power Supply Unit, Mean Well, LRS SeriesMean Well LRS-200-24
Mean Well is one of the most reliable power supply manufacturer in the industry.
It is the one and only choice when it comes to 3D printer’s power supply.
We import our Mean Well PSU from legitimate Mean Well’s distributor.
Do not cheap out such an important part as it may cause safety issue.
You need a reliable power supply. Trust only genuine parts!
SKU: mean-well-lrs-200-24 -
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4
BIGTREETECH SKR v1.4 Turbo
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4BIGTREETECH SKR v1.4 Turbo
SKR v1.4 Turbo is BIGTREETECH’s latest control board for 3D printers and CNC machines.
Carrying its predecessor’s success, SKR v1.4 Turbo quickly becomes the most famous and best selling control board in 2020.
A lot of new features are added since v1.3. It now supports WiFi communication and RGB lights.
- Item Type: Control Board
- Model Number: BIGTREETECH SKR V1.4 Turbo
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M3 – NXP LPC1769FBD100
- Maximum Clock Frequency: 120 MHz
- Wifi Module: ESP-01S
- Dual Z-axis Interface
- Fan Support: 1 x CNC always on fan, 3 x Frequent fan
- Interfaces: I2C, SPI, Wifi, Closed loop drive, RGB light belt, DCDC mode power module
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: 2.8 “TFT, 3.5” TFT, LCD2004, LCD12864
- Support Driver: TMC2226, TMC2209, TMC2208, TMC2130, ST820, DRV8825, A4988, etc.
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-skr-v1-4-turbo
There are no reviews yet.